水渠模具的制作工艺不断改变

2019-12-10 16:50:58

水渠模具种类区分严格按照模具的尺寸,每一种水利U型槽预制块都有自己独特的样式,比如水利U型槽模具制作出来的预制块有底部弧形的,也有倒角型的,或者直接是四方形的,这主要是根据使用U型槽预制块的水流速度而言的。水渠模具种类区分的要点明确在种类上,因为各个工程需要的预制块种类不同,所以根据水流速度的大小确定模具壁厚以及内部形状的构造。水渠模具生产方式有两种,包括了预制生产和现场浇筑,而进行现浇的时候需要将钢模具运输到现场,由于模具的规格较大,而且在运输的过程当中会有颠簸,而为了避免在这这个过程当中有损耗就要注意对模具进行保护,不能让构件出现断裂的情况,当运输到施工场地的时候要做到轻拿轻放,放到干净平整的地面上。

The type of water channel mould is strictly differentiated according to the mould size. Each prefabricated block of water conservancy U-shaped groove has its own unique style. For example, the prefabricated block produced by water conservancy U-shaped groove mould has arc at the bottom, chamfer or square directly, which is mainly based on the water flow speed of prefabricated block of U-shaped groove. The key point to distinguish the types of channel moulds is clear in the types. Because of the different types of prefabricated blocks required by each project, the wall thickness of the moulds and the structure of the internal shape are determined according to the size of the water flow velocity. There are two production methods of canal mould, including prefabrication production and on-site pouring. Steel mould needs to be transported to the site when casting in situ. Due to the large specification of mould, there will be bumps in the process of transportation. In order to avoid loss in this process, it is necessary to protect the mould and prevent the component from fracture when transporting to the site The construction site shall be handled with care and placed on a clean and flat ground.

水渠模具不论是何种规格以及样式的预制块都是可以通过它对混凝土的固定来完成造型,而且每套模板都有自己的专属标签,比如根据长度大小的分类、根据地区使用分类、根据模具壁厚分类、根据接口处不同进行分类等等,通过上述几方面知识的分类标准,可以判断出此类模具的特点就是以U形自主为主要依据,在设计图纸上也是这样安排的。厂家通过这几年生产的发现,水渠的壁厚正在逐渐增加,由过去5-6厘米壁厚增加到现在8-10厘米,壁厚的增加意味着施工单位更加重视预制块的长期使用,从而保证不会频繁更换混凝土U型槽,一来减少人工的投入,二来是对工程安全的负责。

No matter what specification and style of the channel mould is, the prefabricated block can be shaped by fixing the concrete. Each set of mould has its own special label, such as the classification according to the length and size, the use of the region, the wall thickness of the mould, the interface, etc. according to the classification standards of the above-mentioned knowledge, we can It can be concluded that the characteristics of this kind of mould are based on the independence of U-shape, which is also arranged in the design drawings. Through the production in recent years, the manufacturer found that the wall thickness of the channel is gradually increasing, from the past 5-6cm to the present 8-10cm. The increase of the wall thickness means that the construction unit pays more attention to the long-term use of precast blocks, so as to ensure that the concrete U-shaped groove will not be replaced frequently. First, to reduce the input of labor, and second, to be responsible for the safety of the project.

联系方式
联系人

边经理

电话

0312-8103818

手机

18803129528

QQ

107108222

邮箱

925474963@qq.com

地址

河北省保定市清苑区阎庄乡高庄村